Code : ATE104, ATE107, AE101-10, AE101-12, AE101-13, AE101-14, AE101-15, AE101-17, AE101-19, AE101-12S, AE101-3R, AE102, AE103, ATE175, AE107-500, ATE109, AE109-450, AE109-12W, AE108
Brand : KTC
Replacing various belts
Can reach a wide range of locations.
Usage
• Can be used to tighten and loosen nuts and bolts in confined areas.
<Example>
• Vehicle engine starters on automobiles, on engine mounts, on manifolds, fitting air conditioners
Bolts, adjusting bolts on various types of belts, around drive shafts, flanges, and around piping
Characteristics
• Can be used on a wide range of different sized nuts and bolts. (Photo 1)
• Because the wrench and wrench handle are separate entities, they can be combined
at the rear side of the wrench socket to be used in a variety of ways. (Photo 2)
• The wrench itself can be set in 24 different positions at 15° intervals off the handle so
that work can be carried out at a variety of different angles.
• If the wrench bit and the exclusive handle are used in the "free" state, the wrench may
be operated at a high speed. (Photo 3)
• The wrench is a compact, flat ratchet type (15°)
positioning wrench set
positioning wrench/ standard
positioning wrench
position wrench/3.8"sq.
positioning wrench handle (offset type)
Serpentine belt replacement
Usage
• This is an exclusive tool for loosening the tensioner when replacing belts used in
vehicles that are fitted with auto-tension type drive belts (with 1 belt only).
Application
• Is effective for working on domestic vehicles from light-weight to normal passenger vehicles, and
especially on One-box type vehicles (FF vehicles).
Characteristics
• This is a thin, exclusive long rotating head ratchet off-set wrench used
for working on vehicles fitted with auto-tensioning. A large swing
angle can be taken while working inside small engine compartments
without interfering with pulleys and other obstacles.
• Provides easy operations on damper type auto-tensioners fitted in
many heavy FF vehicles because of a non-slip, easy hold, and resin
type grip.
• The exclusive socket can be set at 14/17/19mm, and is convenient where socket length
must be changed frequently.
• A pierced type of thin design that helps eliminate slipping off the bolt.
• Normal sockets can also be used as the 3/8"sq driver is installed onto the offset area of
auto-tensioner wrench.
Belt tensioner wrench
Serpentine belt replacement
BELT WRENCH SET(for mini-cars only)
Application
• Replacement and adjustment of Suzuki air conditioner belts (Wagon R [After September,
2008], MR Wagon [After January, 2006]) (Only the main unit)
• Replacement and adjustment of Daihatsu air conditioner and power steering belts (Move
[after December, 2008], Tanto [After December, 2007]) (Main unit + proprietary socket)
Features
• Smooth work can be achieved by avoiding block with its unique shape.
• Optimum shape can be obtained for the engines of Daihatsu vehicles using the
proprietary socket.
• Since a ratchet head is used at the end, work can be comfortably performed.
• Working time can be reduced only by removing the license plate.
• Removal of the bumper for replacement of the belt is not required.
BELT HOOK TOOL