Ono Sokki Linear Gauge Sensors (Vibration Resistant Type)
Code : GS-6713, GS-6730, GS-6813, GS-6830, GS-6713A, GS-6730A, GS-6813A, GS-6830A
Brand : Ono Sokki
Ono Sokki Linear Gauge Sensors (Vibration Resistant Type)
GS-6713, GS-6730, GS-6813, GS-6830, GS-6713A, GS-6730A, GS-6813A, GS-6830A
|
• Replaced by the GS-6500/6600 series
• Bonded anchorage of electric parts gives better performance of vibration resistance.
• Using ball bearing increases the maximum number or sliding times of the spindle compared with the existing model.
|
Specifications
Model name
Item |
GS-6713 |
GS-6730 |
GS-6813 |
GS-6830 |
| Measurement range |
13 mm |
30 mm |
13 mm |
30 mm |
| Resolution |
10 μm |
1 μm |
| Accuracy (at 20 °C) |
3 μm |
3 μm |
2 μm |
3 μm |
| Maximum spindle velocity*1 |
1(4) m/s |
0.3(1.2) m/s |
| Measurement force(downward)*2 |
1.7 N or less |
2.0 N or less |
1.7 N or less |
2.0 N or less |
Number of sliding times
(proven in our endurance test) |
5 million times or more |
Protection class
(not including connector part) |
IP64 |
| Stem diameter |
Ø15 mm+0-0.009 |
| Power supply |
4.5 to 5.5 VDC |
| Power consumption (5 VDC) |
120 mA or less |
| Signal output (5 VDC) |
Two-phase square wave, phase difference: 90° ±20°
Output voltage Hi:4.5 V or more / Lo:0.4 V or less
|
| Output impedance |
Approx. 22 Ω |
Vibration resistance
(when the power is off)*3 |
147 m/s2 in each of the three axial directions (75 minutes per each),
10 cycles of 10 Hz to150 Hz sweeping |
Shock resistance
(when the power is off)*3 |
1470 m/s2 in each direction for each of three axes,
three times for each of the ±X,Y and Z directions, sine half-wave, pulse duration 6 ms |
| Operating temperature range |
0 to +40 °C |
| Storage temperature range |
-10 to +55 °C |
| Cable length |
Approx. 1.9 m |
| Weight (including cable, connector) |
Approx. 250 g |
Approx. 310 g |
Approx. 250 g |
Approx. 310 g |
| Accessories |
Instruction manual, spanner |
*1. When used with Ono Sokki's Gauge Counter. The values within parentheses () are the maximum spindle velocity used with the DG-4140/DG-4190/DG-5100/DG-3000.
*2. An attachment may not return completely if it is facing upwards.
*3. Vibration/shock resistance values described in above are not guaranteed during measurement operation.
• Disconnected or modified signal cable is not applicable to CE marking.
|
